Basic Rigger Score Sheet

    Candidate Information
    Candidate Last Name*
    Candidate First Name*
    Candidate’s Company*
    Candidate Email*
    Date of Testing*
    SPYDERCRANE Qualification Number (if already in SLS database):
    Examiner Name*

     

    Task 1 - Pass/Fail
    Did the candidate accurately identify the component they were assigned?
    Did the candidate accurately identify the WLL for their assigned component?

     

     

    Task 2 - Pass/Fail
    Did the candidate make a basket hitch?

    Did the candidate use the correct sling to make a basket hitch?

    (6 foot poly round)

    Did the candidate accurately identify the maximum rated capacity?

    (5,200 pounds)

     

    Task 3 - Pass/Fail
    Did the candidate make a choker hitch?

    Did the candidate use the correct sling to make a choker hitch?

    (Wire rope)

    Did the candidate use a shackle properly to make a choker hitch?

    Did the candidate accurately identify the maximum rated capacity?

    (1,900 pounds)

     

    Task 4 - Pass/Fail
    Did the candidate correctly make a 2-leg bridle sling?
     Are the legs of the bridle sling 60°?

    Did the candidate accurately identify the tension on each sling leg and whether it is safe to lift this load?

    (2,310 pounds if 1.155 SAF is used. Varies if measured  , use judgement.)

     

    Task 5 - Pass/Fail

    Did the candidate install the Beckett correctly?

    (at least 6” of dead end, not backwards, wire rope clip installed correctly.

    Did the candidate identify the correct torque for the wire rope clip?

    (45 ft-lbs)

    Did the candidate correctly identify the WLL for this configuration?

    (2,816 pounds)

     

    Task 6 - Pass/Fail
    Did the candidate correctly tie a clove hitch?

     

    Task 7 - Pass/Fail
    Did the candidate lengthen the sling using a shackle properly?
    Did the candidate shorten the sling to 1/3 of its original length using 2 shackles?